2022-02-26 14:18:17
4 likes
5 favorites
0 comments
badmintonThere is one more indispensable accessory – hand glue. Although it is a small accessory, it plays a key role. Because it is in direct contact with our hands, the choice of hand glue directly determines the quality of the hand. This time, I will talk about how to choose the hand glue, and the points of attention when tying the hand glue.
First, the main classification of hand glue
Many novices may buy frombadminton racketI haven’t changed the glue since. You can smell it, and it will make you decide to change it. How to change it? At present, there are generally three kinds of hand glues on the market, namely ordinary hand glue, keel hand glue,towelhand glue. Three different materials of hand glue are also suitable for different people.
1. Ordinary hand glue
It is generally made of pu (polyurethane) material, which is the same material as the inner handle leather. Its advantage is that it has no obvious shortcomings. The effect of sweat absorption and anti-skid is relatively average. It can meet the needs of ordinary entertainment or low-intensity competitions. Therefore, it is the most common hand glue on the court and is widely used.
2. Keel hand glue
It is a hand glue with a sponge strip behind the ordinary hand glue to improve the anti-slip effect and comfort. For some people with big hands, it can improve the grip. Not many people currently use it. The feeling that I have used the keel hand glue is that it feels good to hold the racket after binding it. After playing, I feel that the handle of the racket is larger, the grip becomes worse, and the feeling of hitting the ball is weakened.
3. Towel hand glue
As the name suggests, it is a hand glue whose main body is a towel. The main material is cotton. Because the position of the towel needs to be fixed, double-sided tape is added to one side of the towel. Its advantages are obvious, it is more sweat-absorbent, more slip-resistant, and it also improves the hitting feeling to a certain extent. The disadvantages are also obvious. It is not durable and easy to grind. Because it is made of cotton, it has a great impact on the towel hand glue after absorbing sweat, and it cannot be cleaned. Therefore, it is necessary to change the hand glue frequently. Blisters are easily rubbed out. It is relatively rare to use towel hand gel on ordinary courts, but it is more common in high-intensity games and competitions.
2. How to tie the hand glue?
Hand Glue Steps
But it should be noted that:
Attention 1: Heavy coverage can be increased to 1/2, can be tied up along the traces of the previous circle, easy to use, no need to adjust the spacing, while maintaining a flat, double-layered hand glue, the sweat absorption effect is also improved.
Attention 2: Do not pull the hand glue too tightly, do not deform the hand glue when tying,ifIf you tie it too tightly, you will find that the sweat absorption effect will be poor, and there will be a large part of the hand glue left, which can only be cut and thrown away. The first time you bind the hand glue, the strength is generally not well controlled. After a few times, you will know how to control the strength.
Attention 3: Change the gel frequently, especially when using a towel gel. After using it for a while, the glue still stinks. Whether to replace or not mainly depends on whether the hand glue is damaged and whether it stinks.
Attention 4: You can buy a roll of sealing tape. Generally, the hand glue will be equipped with a small piece of sealing tape, which is long enough for you to fix the hand glue, but to ensure the aesthetics, you still need to use the sealing tape.
Attention 5: After the badminton racket is purchased, there will be an inner handle leather, and a layer of plastic protective film will be covered on the outside. So do the inner handle skin and plastic protective film need to be torn off? The plastic protective film plays a role in protecting the inner handle skin and can be torn off. The inner handle skin has good waterproof performance and plays a role in protecting the handle, which needs to be retained. However, some people will remove the inner handle skin and replace it with a shock-absorbing film. If you take off the inner handle skin and directly tie the hand glue, the edges and corners of the handle will make you very uncomfortable, so you need to wrap a layer of shock-absorbing film first. Tie the glue on.
The choice of hand glue does not need to be limited.rootAccording to personal characteristics, choose the one that suits you best. I hope this article is helpful for you to choose and use hand glue.
The author declares that this article has no relevant interests, and welcomes friends to communicate rationally and discuss harmoniously~
