Typ JGB-E 1″
Stainless steel sieve insert, built-in rotary flange with bayonet connection
backwash indicator
pipe connection 1″
Installation length see below
upper / lower passage width: 0.095 / 0.125 mm
Water flow see below
Temperature max. 30°C
The domestic water station complies with the technical rules for drinking water installations according to DIN EN 806 ff. and the national supplement DIN 1988 ff. as well as DIN EN 1717. They are certified by the DVGW (German Technical and Scientific Association for Gas and Water). Requirements of DIN EN 13443-1, DIN 19628 and DIN EN 1567 (pressure level PN16) for mechanical domestic water stations in the drinking water sector tested and entitled to bear the DIN DVGW mark.
Advantages and features:
Inlet pressure up to 16 bar, outlet pressure adjustable 1.5-6 bar
can be installed in all flow directions
can be backwashed without interrupting the water supply, at the same time the sight glass is cleaned from the inside
Degree of contamination can be checked at any time through the sight glass
patented suction channel
Faster installation thanks to Quickset E with bayonet connection and screw connection
Performance and installation lengths:
Dimension: DN 25 1″
Water flow: 3.6 m³/h
Installation length with grommets: 195 mm
Scope of delivery:
Completely pre-assembled domestic water station
with backwash protective filter, pressure reducer and manometer
Built-in rotary flange, screw connections and seals
Installation and operating instructions
