description
Complete filter replacement parts for osmosis maintenance: CULLIGAN Aqua Cleer or AC30, ERIE Microline or any system from the manufacturer Clack. Complete filter replacement parts for osmosis maintenance: Culligan Aqua Cleer or AC30, Erie Microline or any system made by Clack. 1 turbidity filter, 1 GAC carbon filter and 1 in-line post filter. Complete maintenance manual with all the following steps to carry out a perfect disinfection of the entire system, including the preparation of the disinfectant. The package contains: Sediment Cartridge compatible Culligan: turbidity cartridge 5 microns to eliminate elements suspended in the water. The sediment cartridge is compatible with reverse osmosis: – Culligan AC15 – Culligan AC30 – Culligan LC50 – Culligan H – 5 – Culligan H – 53 – Culligan H – 83 – Culligan HR-83S – Culligan H30S – R – Culligan HC-30PRV – Culligan CTA -14S – Culligan CTA – 3 Sediment cartridge replaces the following cartridge numbers: CUL-SED5, S7011C / S7011-C, RS-23-SED, RS-23-SED-5 / SR-23-SED5, 00-4015-38, 00-0001-20, 00-4412-75, Pentek 255824 -43, FI-S-7011… Compatible Culligan Carbon Cartridge: To remove chlorine and other elements that can damage the membrane. Culligan compatible RO AC30 – AC15 – CL50. Culligan compatible carbon cartridge is compatible with osmosis related to: – Culligan AC15 – Culligan AC30 – Culligan AC50 – Culligan LC50 – Culligan H – 5 – Culligan H – 53 – Culligan H – 82 – Culligan H – 83 – Culligan HR-83S – Culligan H30S – R – Culligan HC-30PRV – Culligan CTA -14S – Culligan CTA – 3 Culligan Compatible Carbon Filter Specifications: – Pressure: 1.6 PSI – Filtration: 10 microns – Temperature range: 40 to 180 F – Filter media: Coconut Coconut Block – Dimensions: 11 3/4″ long x 1.9″ wide – Shelf life: Approximately 3-6 months depending on frequency of use – Rating: 1 GPM 1.6 PSI pressure (may vary by reverse osmosis system) Carbon compatible Cartridge references: – SC1216110, – S7011 – C. – S7025 – C.
