With stainless steel filter mesh, pressure reducer, cleaning unit, ceramic flushing valve, time-controlled automatic backflushing with safety module and UV filter hood cover.
Horizontal or vertical installation by simply turning the JUDO QUICKSET-E built-in rotary flange.
Product advantages:
-
Reliable protection
against dirt entry
-
Backwash instead of rinsing
-
Automatic, thorough, pure
with automatic, time-controlled backwashing
-
Safe in the event of a power failure
Patented safety module to end the backwash process and to close the flush valve in the event of a power failure
-
Proven
Screen cleaning via channel suction without interrupting the water supply during backwashing
-
Durable
patented backwash valve made of high-tech ceramic
-
Resource-saving and cost-saving
avoids waste caused by changing filter cartridges
-
Protects and regulates
with pressure reducer to compensate for pressure fluctuations and adjustable post-pressure
-
With reprint display
-
Fast assembly
with the two-screw technique
-
Integrated free outlet
-
Optional leakage protection
Scope of delivery:
Filter housing made of high quality plastic PN 16; Built-in rotary flange with patented brass bayonet connection Screw connection (threaded connection according to DIN EN 10226-1) and two-screwconnection technology; horizontal or vertical installation possible; with pressure reducer insert and hand wheel; stainless steel filter mesh; patented backwash unit; Backwashing with simultaneous cleaning of the sight glass (with movable UV filter bell cover). With integrated free outlet and patented ceramic flush valve; hose connection.
With time-controlled automatic backwash: the screen surface is cleaned three times per backwash. Preselectable setting of the backwash interval (1 day, 1 week, 1 month, 2 months). With potential-free contact for remote transmission of the fault message. Before triggering the backwash start, the patented safety module checks whether the buffer battery has enough power reserve to complete the backwash process in the event of a power failure. Only then does backwashing take place.
Pressure gauge, pressure reducer with factory setting of 4 bar after pressure, setting range of the after pressure of 1.5 – 6 bar *; noise protection tested group 1 without restrictions; cover hood with integrated backwash month display; Plug-in power supply 230 V/50 Hz.
A notice:
* Depending on the operating conditions, it may be necessary to increase the downstream pressure (to adjust the ratio of upstream and downstream pressures).
